Signs You Need a Water Heater Repair

Going on a day without hot water can be very unpleasant. It's not just the inconvenience; people depend on hot water to take showers, clean dishes, and cook food. Hot water is your lifeline when dealing with a plumbing issue. So what are the signs to look for when your hot water isn't working? When should you call Mr. Rooter Plumbing for a water heater repair?

A properly maintained water heater will last for years without any problems. However, signs of issues in a water heater will appear before the water heater requires an emergency plumber. Let’s discuss how to tell if you need a water heater repair.

Lack of Hot Water

If you cannot get hot water from the faucet in your home, it's likely a sign that your water heater needs repair. If the problem is only temporary, such as when someone just took a shower, the issue may be with the temperature setting on your hot water faucet. Turn up the hot water faucet until it produces warm or hot water, and then turn it back to normal settings once you've had enough.

If there is still no hot water after waiting a few minutes, check to see if there is an electrical power outage in your neighborhood by checking with local authorities or news stations. If there isn't one, turn off the circuit breaker for your water heater and then turn it back on again when you need to use it. This will reset any issues that may have developed within your system since turning off the power.

Water Temperature Fluctuates Suddenly

If you notice that your water temperature has changed or is fluctuating, it could be a sign of problems with your water heater. Water heaters can experience fluctuations in temperature when they are not properly functioning, so it is important to get them repaired as soon as possible.

If you find that your water temperatures are frequently fluctuating, or if you notice that your hot water temperature is significantly lower than usual, you may need to have your water heater repaired. The most common reason for this problem is sediment buildup in the unit's tank. This buildup can cause corrosion and other issues with the functioning of the unit and will need to be removed before it causes further damage.

Rusty Water

Rusty water is a sure sign that you have iron-based bacteria growing in your tank. This can happen if the tank is not balanced properly or there is too much rust in the water supply. The best way to fix it is with a new treatment system or draining and flushing out the tank.

Low Pressure

If your hot water suddenly starts coming out at low pressure, your main valve may leak, or there could be a clog in the pipes leading to your house. This can also be caused by other issues, including sediment buildup in the pipes, leaks in your home's plumbing system, and sediment buildup inside the tank itself. If this happens, call a plumber immediately so they can determine what's wrong and fix it before it becomes more serious than it already is!

Cloudy Water

Cloudy water is caused by sediment that has settled in your tank. Sediment can build up when there is not enough water flowing through the tank to keep it clean or if the water heater is not level. The sediment will cling to the bottom of your water heater and can clog up the heating elements or cause corrosion.

Turn off the power to your water heater and drain as much water as possible. Then use a garden hose to flush out any remaining contaminants inside your unit. Once you have flushed out as much dirt and debris as possible, turn back on your power and refill the tank with fresh water.

Mr. Rooter Plumbing

Call a plumber in Gandy, FL immediately if you have noticed any of these problems in your water heater. You will want to look for signs of corrosion and rust on the interior and exterior of the tank since these are red flags that water is leaking from the tank at a rapid rate. If your water heater is rusted, it could be time for a replacement rather than a repair.